Oral solids · Contract manufacturing in India

Elemental Selenium 50 mcg, Levocarnitine 500 mg, Lycopene Powder 2.5 mg, Ubidecarenone 50 mg, Vitamin K2-7 50 mcg, Zinc Sulphate 12.5 mg Film-Coated Tablets

Request manufacturing feasibility

Discuss third-party manufacturing of Elemental Selenium 50 mcg, Levocarnitine 500 mg, Lycopene Powder 2.5 mg, Ubidecarenone 50 mg, Vitamin K2-7 50 mcg, Zinc Sulphate 12.5 mg Film-Coated Tablets with Walter Healthcare, India. Share your target market, required tablet count and finished-pack count, packaging and launch timeline for a product-specific quotation.

Catalogue reference
WH-0666
Composition and strength
Elemental Selenium 50 mcg, Levocarnitine 500 mg, Lycopene Powder 2.5 mg, Ubidecarenone 50 mg, Vitamin K2-7 50 mcg, Zinc Sulphate 12.5 mg Film-Coated
Dosage form
Tablets
Indicative administration route
Oral
Therapeutic navigation area
Nutrition & supportive care
Pharmacological class
Nutritional supplement
Manufacturing stream
Non-beta-lactam

Catalogue details support an initial B2B discussion. Walter confirms the applicable unit, current licence scope, formula, target market and commercial feasibility before making a commitment.

Clinical reference

Mechanism and pharmacokinetics.

Explore the published evidence for the ingredients in Elemental Selenium 50 mcg, Levocarnitine 500 mg, Lycopene Powder 2.5 mg, Ubidecarenone 50 mg, Vitamin K2-7 50 mcg, Zinc Sulphate 12.5 mg Film-Coated Tablets. Each reference identifies its source formulation and study context. Ingredient studies describe the named reference product; they do not establish the pharmacokinetics, clinical suitability or bioequivalence of this finished formulation.

How to read our product information and sources ↗

Additional ingredient references still to be verified: Elemental Selenium; Lycopene Powder. The references below cover only the named ingredients.

Nutrient reference

Zinc

Reference for: Zinc Sulphate. Source presentation: oral nutrient reference. Source route: oral.

Biological role

Zinc participates in the catalytic activity of numerous enzymes and contributes to protein and DNA synthesis, cell signaling, cell division and normal immune function.

Absorption and disposition

Zinc balance depends on intestinal absorption, secretion into the gastrointestinal tract and reabsorption. Fractional absorption falls as intake rises. Much of the body zinc pool is in muscle and bone. This nutrient-level reference does not establish the absorption rate or bioavailability of a particular zinc salt or combination.

Nutrient-level summary from NIH. Absorption and disposition describe general oral nutritional physiology, not a pharmacokinetic or bioequivalence study of this finished product.

Source: NIH Office of Dietary Supplements: Zinc

Reference accessed .

Nutrient reference

Vitamin K

Reference for: Vitamin K2-7. Source presentation: oral nutrient reference. Source route: oral.

Biological role

Vitamin K acts as a coenzyme for vitamin-K-dependent carboxylation needed to produce functional proteins in coagulation and bone metabolism. Phylloquinone and menaquinones are members of this vitamin family.

Absorption and disposition

Ingested vitamin K is incorporated into intestinal micelles, absorbed by enterocytes and transported in chylomicrons through lymph to the liver. Circulating vitamin K is mainly carried in lipoproteins. It is metabolized and eliminated relatively rapidly; values measured for phylloquinone should not be assigned to a menaquinone formulation.

Nutrient-level summary from NIH. Absorption and disposition describe general oral nutritional physiology, not a pharmacokinetic or bioequivalence study of this finished product.

Source: NIH Office of Dietary Supplements: Vitamin K

Reference accessed .

Ingredient-level reference

Ubidecarenone

Reference for: Ubidecarenone. Source presentation: SUGAR-COATED TABLET. Source route: oral.

Mechanism of action

The reference describes mitochondrial incorporation and effects on myocardial energy metabolism. Much of its mechanistic support comes from animal ischemia models; those findings do not establish efficacy for every supplement or combination.

Pharmacokinetics

A fed, single-dose comparison in healthy adult men used ten 10 mg tablets, a study exposure distinct from the label’s routine single dose. For the Sawai preparation, mean peak time was 5 hours and the baseline-corrected elimination half-life was 18.9 hours. These are formulation-specific study findings, not dosing advice or evidence of equivalence for a softgel, higher-strength supplement or different combination.

Ingredient-level summary of the cited reference product. Study formulation, route, strength and population govern interpretation; these data do not establish pharmacokinetics or bioequivalence for Walter's formulation or fixed combination.

Source: Japan PMDA: Ubidecarenone Sawai 10 mg tablets, April 2024, sections 16 and 18

Reference accessed .

Prescribing-label excerpts

Levocarnitine

Reference for: Levocarnitine. Source presentation: tablet. Source route: oral.

The source label presents its clinical-pharmacology findings together. These selected passages retain the source’s study context; the full label provides the complete discussion.

Clinical pharmacology

Levocarnitine is a naturally occurring substance required in mammalian energy metabolism. It has been shown to facilitate long-chain fatty acid entry into cellular mitochondria, thereby delivering substrate for oxidation and subsequent energy production. Fatty acids are utilized as an energy substrate in all tissues except the brain. In skeletal and cardiac muscle, fatty acids are the main substrate for energy production.

Primary systemic carnitine deficiency is characterized by low concentrations of levocarnitine in plasma, RBC, and/or tissues. It has not been possible to determine which symptoms are due to carnitine deficiency and which are due to an underlying organic acidemia, as symptoms of both abnormalities may be expected to improve with levocarnitine. The literature reports that carnitine can promote the excretion of excess organic or fatty acids in patients with defects in fatty acid metabolism and/or specific organic acidopathies that bioaccumulate acylCoA esters.1-6

Secondary carnitine deficiency can be a consequence of inborn errors of metabolism. Levocarnitine may alleviate the metabolic abnormalities of patients with inborn errors that result in accumulation of toxic organic acids. Conditions for which this effect has been demonstrated are: glutaric aciduria II, methyl malonic aciduria, propionic acidemia, and medium chain fatty acylCoA dehydrogenase deficiency.7,8 Autointoxication occurs in these patients due to the accumulation of acylCoA compounds that disrupt intermediary metabolism. The subsequent hydrolysis of the acylCoA compound to its free acid results in acidosis which can be life-threatening. Levocarnitine clears the acylCoA compound by formation of acylcarnitine, which is quickly excreted. Carnitine deficiency is defined biochemically as abnormally low plasma concentrations of free carnitine, less than 20 μmol/L at one week post term and may be associated with low tissue and/or urine concentrations. Further, this condition may be associated with a plasma concentration ratio of acylcarnitine/levocarnitine greater than 0.4 or abnormally elevated concentrations of acylcarnitine in the urine. In premature infants and newborns, secondary deficiency is defined as plasma levocarnitine concentrations below age-related normal concentrations.

In a relative bioavailability study in 15 healthy adult male volunteers, levocarnitine tablets were found to be bio-equivalent to levocarnitine oral solution. Following 4 days of dosing with 6 tablets of levocarnitine 330 mg b.i.d. or 2 g of levocarnitine oral solution b.i.d., the maximum plasma concentration (Cmax) was about 80 μmol/L and the time to maximum plasma concentration (Tmax) occurred at 3.3 hours.

The plasma concentration profiles of levocarnitine after a slow 3 minute intravenous bolus dose of 20 mg/kg of levocarnitine were described by a two-compartment model. Following a single i.v. administration, approximately 76% of the levocarnitine dose was excreted in the urine during the 0-24h interval. Using plasma concentrations uncorrected for endogenous levocarnitine, the mean distribution half life was 0.585 hours and the mean apparent terminal elimination half life was 17.4 hours.

The absolute bioavailability of levocarnitine from the one oral formulation of levocarnitine, calculated after correction for circulating endogenous plasma concentrations of levocarnitine, was 15.1 ± 5.3% for levocarnitine tablets.

Total body clearance of levocarnitine (Dose/AUC including endogenous baseline concentrations) was a mean of 4.00 L/h.

Levocarnitine was not bound to plasma protein or albumin when tested at any concentration or with any species including the human.9

In a pharmacokinetic study where five normal adult male volunteers received an oral dose of [3H-methyl]-L-carnitine following 15 days of a high carnitine diet and additional carnitine supplement, 58 to 65% of the administered radioactive dose was recovered in the urine and feces in 5 to 11 days. Maximum concentration of [3H-methyl]-L-carnitine in serum occurred from 2.0 to 4.5 hr after drug administration. Major metabolites found were trimethylamine N-oxide, primarily in urine (8% to 49% of the administered dose) and [3H]-γ-butyrobetaine, primarily in feces (0.44% to 45% of the administered dose). Urinary excretion of levocarnitine was about 4 to 8% of the dose. Fecal excretion of total carnitine was less than 1% of the administered dose.10

After attainment of steady state following 4 days of oral administration of levocarnitine tablets (1980 mg q12h) to 15 healthy male volunteers, the mean urinary excretion of levocarnitine during a single dosing interval (12h) was about 9% of the orally administered dose (uncorrected for endogenous urinary excretion).

Selected passages from the cited U.S. prescribing label. The studies concern the source product and populations named in each passage; they do not establish Walter-product bioequivalence, an approved indication, or the kinetics of another fixed combination. Tables and the full prescribing information remain available in the source.

Source: DailyMed: Levocarnitine — tablet

Reference accessed . Label revision: 2024-08-19.

Editorial development perspective

What deserves attention in this formulation.

These notes use the catalogue composition and presentation to frame a technical discussion. They are planning considerations, not tested properties or clinical findings for this product.

The clinical references on this page cover only their named ingredients. These development notes do not resolve the remaining clinical-reference gaps.

About these development notes and source limitations ↗

Balance tablet performance and processability

Listed presentation: Tablets.

Use early development batches to compare blend flow, compression behaviour, tablet strength and the appropriate release test. A harder tablet or a faster disintegration result is not, by itself, a complete product specification. Set priorities around the intended presentation, then check that the chosen process can reproduce them at the proposed scale.

Reconcile the declared amount with the input material

Catalogue wording: “Elemental”.

Put the declared active or elemental amount and the quantity of its supplied compound on the same calculation sheet. Check the equivalence basis against the raw-material assay and the proposed label wording. Keep calculations explicit when comparing suppliers so that a change in grade does not silently change the intended amount per unit.

Carry the exact ingredient form into development

Catalogue wording: “Sulphate”.

Use the named ingredient form when requesting material specifications and comparing possible suppliers. Resolve assay, water-content and strength-equivalence conventions before converting a formula into batch quantities. A similarly named salt or hydrate should be assessed as a distinct material choice rather than introduced through a naming shortcut.

Suggested starting point

A practical starting point is to reconcile the declared amount with the input material. For this tablets brief, agree the target characteristics and a short set of measurable development questions before comparing prototypes or supplier proposals. Keep unresolved clinical claims outside the product specification until supporting evidence is available.

Discuss this product brief

Manufacturing & packaging brief

Plan the tablet presentation.

Use this preparation guide for Elemental Selenium 50 mcg, Levocarnitine 500 mg, Lycopene Powder 2.5 mg, Ubidecarenone 50 mg, Vitamin K2-7 50 mcg, Zinc Sulphate 12.5 mg Film-Coated Tablets. These are the decisions to resolve with the technical team before a site, process and commercial scope are confirmed.

Presentation & formulation

Define release type, coating, scoring and any reference-product requirements. Keep each strength and presentation as a separate item in the brief.

Quality & technical transfer

Agree the product specification, analytical methods and applicable dissolution or disintegration requirements. Identify the formula and process information available for transfer.

Review the technical documents

Packaging configuration

Compare the proposed blister, strip or bottle with the formulation and its protection requirements. Specify tablets per primary pack and primary packs per carton.

Explore packaging options

Details to confirm for this record

Full composition
Keep all named components and their individual amounts together in the specification. Ingredient substitutions, omissions and changed ratios require a separate formula and permission review.
Salt and strength wording
Confirm whether the stated amount refers to the named salt, hydrate or equivalent active moiety. Use the agreed expression consistently in the specification, quotation and artwork.

Quantities, MOQ & lead time

For Elemental Selenium 50 mcg, Levocarnitine 500 mg, Lycopene Powder 2.5 mg, Ubidecarenone 50 mg, Vitamin K2-7 50 mcg, Zinc Sulphate 12.5 mg Film-Coated Tablets (WH-0666), state the tablet count and finished-pack count, target market and reorder forecast. MOQ and lead time depend on the assessed formula, process, components, testing and project readiness; request those terms in writing.

Discuss this manufacturing brief

Explore the context

Build the right manufacturing brief.

Common questions

Before you request a quotation.

Elemental Selenium 50 mcg, Levocarnitine 500 mg, Lycopene Powder 2.5 mg, Ubidecarenone 50 mg, Vitamin K2-7 50 mcg, Zinc Sulphate 12.5 mg Film-Coated Tablets

What is listed in the catalogue?

The catalogue lists Elemental Selenium 50 mcg, Levocarnitine 500 mg, Lycopene Powder 2.5 mg, Ubidecarenone 50 mg, Vitamin K2-7 50 mcg, Zinc Sulphate 12.5 mg Film-Coated as tablets in its nutrition & supportive care navigation area and non-beta-lactam manufacturing stream.

How do you confirm manufacturing availability?

Send Walter your requirement for Elemental Selenium 50 mcg, Levocarnitine 500 mg, Lycopene Powder 2.5 mg, Ubidecarenone 50 mg, Vitamin K2-7 50 mcg, Zinc Sulphate 12.5 mg Film-Coated Tablets. The team reviews the applicable product permission and unit, formulation and equipment fit, testing, packaging and production schedule before confirming the manufacturing scope in writing. Request the relevant product and facility documents with your enquiry.

What do I need for a quotation?

Share the exact composition and strength, tablets presentation, target market, initial quantity, preferred pack and timing. Identify whether this is a new product, development brief or transfer.

The quotation must confirm MOQ, inclusions, prerequisites and lead time for the proposed product and site.

What is needed for Indian and export markets?

For India, share the intended brand or institutional supply requirement, pack sizes, initial order quantity and artwork needs for Elemental Selenium 50 mcg, Levocarnitine 500 mg, Lycopene Powder 2.5 mg, Ubidecarenone 50 mg, Vitamin K2-7 50 mcg, Zinc Sulphate 12.5 mg Film-Coated Tablets. Confirm the applicable product permission, manufacturing unit and labelling requirements with the team.

For export, identify each destination country, proposed pack, language and registration or dossier requirements. Ask which product-specific quality and stability documents are available. Container compatibility and destination-market requirements need review; a catalogue record does not establish export registration or a shelf-life commitment.

How do I submit my enquiry?

Use the product-specific enquiry button to carry this composition and dosage form into the form. After a successful submission, a receipt reference confirms that your brief has been saved for review. Use the RFQ checklist to prepare the remaining details.

Technical document review

Which documents can I ask Walter to review?

Ask about manufacturing and packing records, specifications, analytical methods, Certificates of Analysis (COA), stability evidence, the Process Validation Protocol (PVP) and Process Validation Report (PVR). The wider checklist below covers supplier qualification, technical transfer and ongoing supply.

View the full document checklist 14 review areas
Site, licence and audit scope
Manufacturing licence, applicable product permissions, GMP certificates, Site Master File, supplier-qualification questionnaire and relevant audit responses.
Manufacturing, packing and batch release
Master Formula Record (MFR), master packing instructions, Batch Manufacturing Record (BMR), Batch Packing Record (BPR), reconciliation and authorised release records.
Process validation and continued verification
Process Validation Protocol (PVP), Process Validation Report (PVR), process performance qualification documents and continued process verification trends.
Equipment, facilities and utilities
Validation Master Plan (VMP), user requirements, DQ/IQ/OQ/PQ records, calibration and maintenance evidence for relevant equipment and utilities.
Cleaning, carryover and hold times
Cleaning Validation Protocol (CVP), Cleaning Validation Report (CVR), residue limits, recovery studies and applicable clean, dirty and process hold-time studies.
Specifications and analytical evidence
Specifications, Method of Analysis (MOA), Standard Testing Procedure (STP), Certificates of Analysis (COA), analytical validation, verification and method-transfer records.
Stability, packaging and transport
Stability protocols/reports, ongoing stability commitments, pack specifications, approved artwork, compatibility and applicable packaging or transport studies.
Development and technology transfer
Development report, technology-transfer protocol/report, gap assessment, control strategy, critical quality attributes and critical process parameters.
Quality reviews, investigations and changes
Product Quality Review (PQR) / Annual Product Review (APR), deviations, CAPA, change control, OOS/OOT trends, complaints, recalls and relevant SOP/training records.
Material suppliers and impurity risks
API/excipient supplier qualification, traceability, material COAs, relevant origin declarations and impurity risk assessments with supporting tests.
Sterile-product evidence, where applicable
Contamination Control Strategy (CCS), media-fill/aseptic simulation reports, sterilisation and filtration validation, environmental monitoring, sterility/endotoxin and container-closure integrity evidence.
Computerised systems and data integrity
Computerised-system validation, access controls, audit-trail review, backup/restore checks and relevant data-integrity procedures.
Market-specific regulatory support
Applicable dossier sections, API master-file/CEP support, bioequivalence or biowaiver evidence and Certificate of a Pharmaceutical Product (CPP/CoPP), where required and available.
Quality agreement and access arrangements
Quality/technical agreement covering responsibilities, release, changes, subcontracting, investigations, complaints, recalls, audits and document access.

Agree the list for the exact product, site, process, pack, market and project stage. QA confirms what exists, applies and may be shared; some records may require an NDA, redaction or controlled review. See document definitions and review guidance.

Important qualification

This B2B catalogue record is not proof of current approval or confirmation that Elemental Selenium 50 mcg, Levocarnitine 500 mg, Lycopene Powder 2.5 mg, Ubidecarenone 50 mg, Vitamin K2-7 50 mcg, Zinc Sulphate 12.5 mg Film-Coated Tablets is available for sale. It is not prescribing information or patient advice. Any Drugs Rules status, current approval, exemption, applicable unit, licence scope, formulation, claims, brand use, destination-market registration and commercial feasibility require documentary verification and Walter's written confirmation. Read the full regulatory disclaimer.

Composition and classification are taken from Walter's product catalogue. The manufacturing guide helps buyers prepare a technical brief. Clinical references, where shown, describe the cited product and study. Manufacturing guide updated .