Sterile injectables · Contract manufacturing in India

Atracurium Besylate 50 mg · Liquid injectables

Request manufacturing feasibility

Discuss third-party manufacturing of Atracurium Besylate 50 mg Liquid injectables with Walter Healthcare, India. Share your target market, required container count and fill volume, packaging and launch timeline for a product-specific quotation.

Catalogue reference
WH-1805
Composition and strength
Atracurium Besylate 50 mg
Dosage form
Liquid injectables
Indicative administration route
Parenteral
Therapeutic navigation area
Critical care & anaesthesia
Pharmacological class
Critical-care agent
Manufacturing stream
Non-beta-lactam

Catalogue details support an initial B2B discussion. Walter confirms the applicable unit, current licence scope, formula, target market and commercial feasibility before making a commitment.

Clinical reference

Mechanism and pharmacokinetics.

Explore the published evidence for the ingredients in Atracurium Besylate 50 mg Liquid injectables. Each reference identifies its source formulation and study context. Ingredient studies describe the named reference product; they do not establish the pharmacokinetics, clinical suitability or bioequivalence of this finished formulation.

How to read our product information and sources ↗

Prescribing-label excerpts

Atracurium Besylate

Reference for: Atracurium Besylate. Source presentation: injection, solution. Source route: intravenous.

The source label presents its clinical-pharmacology findings together. These selected passages retain the source’s study context; the full label provides the complete discussion.

Clinical pharmacology

Atracurium besylate is a nondepolarizing skeletal muscle relaxant. Nondepolarizing agents antagonize the neurotransmitter action of acetylcholine by binding competitively with cholinergic receptor sites on the motor end-plate. This antagonism is inhibited, and neuromuscular block reversed, by acetylcholinesterase inhibitors such as neostigmine, edrophonium, and pyridostigmine.

Atracurium can be used most advantageously if muscle twitch response to peripheral nerve stimulation is monitored to assess degree of muscle relaxation.

The duration of neuromuscular block produced by atracurium is approximately one-third to one-half the duration of block by d-tubocurarine, metocurine, and pancuronium at initially equipotent doses. As with other nondepolarizing neuromuscular blockers, the time to onset of paralysis decreases and the duration of maximum effect increases with increasing atracurium doses.

The ED95 (dose required to produce 95% suppression of the muscle twitch response with balanced anesthesia) has averaged 0.23 mg/kg (0.11 to 0.26 mg/kg in various studies). An initial atracurium dose of 0.4 to 0.5 mg/kg generally produces maximum neuromuscular block within 3 to 5 minutes of injection, with good or excellent intubation conditions within 2 to 2.5 minutes in most patients. Recovery from neuromuscular block (under balanced anesthesia) can be expected to begin approximately 20 to 35 minutes after injection. Under balanced anesthesia, recovery to 25% of control is achieved approximately 35 to 45 minutes after injection, and recovery is usually 95% complete approximately 60 to 70 minutes after injection. The neuromuscular blocking action of atracurium is enhanced in the presence of potent inhalation anesthetics. Isoflurane and enflurane increase the potency of atracurium and prolong neuromuscular block by approximately 35%; however, halothane's potentiating effect (approximately 20%) is marginal (see DOSAGE AND ADMINISTRATION ).

Repeated administration of maintenance doses of atracurium has no cumulative effect on the duration of neuromuscular block if recovery is allowed to begin prior to repeat dosing. Moreover, the time needed to recover from repeat doses does not change with additional doses. Repeat doses can therefore be administered at relatively regular intervals with predictable results. After an initial dose of 0.4 to 0.5 mg/kg under balanced anesthesia, the first maintenance dose (suggested maintenance dose is 0.08 to 0.10 mg/kg) is generally required within 20 to 45 minutes, and subsequent maintenance doses are usually required at approximately 15 to 25 minute intervals.

Once recovery from atracurium's neuromuscular blocking effects begins, it proceeds more rapidly than recovery from d-tubocurarine, metocurine, and pancuronium. Regardless of the atracurium dose, the time from start of recovery (from complete block) to complete (95%) recovery is approximately 30 minutes under balanced anesthesia, and approximately 40 minutes under halothane, enflurane or isoflurane. Repeated doses have no cumulative effect on recovery rate.

Reversal of neuromuscular block produced by atracurium can be achieved with an anticholinesterase agent such as neostigmine, edrophonium, or pyridostigmine, in conjunction with an anticholinergic agent such as atropine or glycopyrrolate. Under balanced anesthesia, reversal can usually be attempted approximately 20 to 35 minutes after an initial atracurium besylate dose of 0.4 to 0.5 mg/kg, or approximately 10 to 30 minutes after a 0.08 to 0.10 mg/kg maintenance dose, when recovery of muscle twitch has started. Complete reversal is usually attained within 8 to 10 minutes of the administration of reversing agents. Rare instances of breathing difficulties, possibly related to incomplete reversal, have been reported following attempted pharmacologic antagonism of atracurium-induced neuromuscular block. As with other agents in this class, the tendency for residual neuromuscular block is increased if reversal is attempted at deep levels of block or if inadequate doses of reversal agents are employed.

The pharmacokinetics of atracurium in humans are essentially linear within the 0.3 to 0.6 mg/kg dose range. The elimination half-life is approximately 20 minutes. THE DURATION OF NEUROMUSCULAR BLOCK PRODUCED BY ATRACURIUM BESYLATE DOES NOT CORRELATE WITH PLASMA PSEUDOCHOLINESTERASE LEVELS AND IS NOT ALTERED BY THE ABSENCE OF RENAL FUNCTION. This is consistent with the results of in vitro studies which have shown that atracurium is inactivated in plasma via two nonoxidative pathways: ester hydrolysis, catalyzed by nonspecific esterases; and Hofmann elimination, a nonenzymatic chemical process which occurs at physiological pH. Some placental transfer occurs in humans.

Radiolabel studies demonstrated that atracurium undergoes extensive degradation in cats, and that neither kidney nor liver plays a major role in this elimination. Biliary and urinary excretion were the major routes of excretion of radioactivity (totaling >90% of the labeled dose within 7 hours of dosing), of which atracurium represented only a minor fraction. The metabolites in bile and urine were similar, including products of Hofmann elimination and ester hydrolysis.

Elderly patients may have slightly altered pharmacokinetic parameters compared to younger patients, with a slightly decreased total plasma clearance which is offset by a corresponding increase in volume of distribution. The net effect is that there has been no significant difference in clinical duration and recovery from neuromuscular block observed between elderly and younger patients receiving atracurium besylate.

Selected passages from the cited U.S. prescribing label. The studies concern the source product and populations named in each passage; they do not establish Walter-product bioequivalence, an approved indication, or the kinetics of another fixed combination. Tables and the full prescribing information remain available in the source.

Source: DailyMed: Atracurium Besylate — injection, solution

Reference accessed . Label revision: 2024-12-04.

Manufacturing & packaging brief

Plan the liquid-injectable presentation.

Use this preparation guide for Atracurium Besylate 50 mg Liquid injectables. These are the decisions to resolve with the technical team before a site, process and commercial scope are confirmed.

Presentation & formulation

Confirm concentration, fill volume, route and whether the proposed container is single-dose or multidose. Identify the formulation and transfer information available.

Quality & technical transfer

Ask for review of the sterile-process strategy, applicable sterility, endotoxin and particulate controls, analytical methods and container-closure integrity requirements.

Review the technical documents

Packaging configuration

Specify ampoule, vial or other proposed container, contact materials, closure and secondary pack. Confirm equipment and facility fit for that configuration.

Explore packaging options

Details to confirm for this record

Salt and strength wording
Confirm whether the stated amount refers to the named salt, hydrate or equivalent active moiety. Use the agreed expression consistently in the specification, quotation and artwork.
Concentration and pack size
The record does not state a complete concentration basis. Confirm the amount per volume or weight before a specification, label or quotation is finalised; no denominator has been assumed here.

Quantities, MOQ & lead time

For Atracurium Besylate 50 mg Liquid injectables, state the container count and fill volume, target market and reorder forecast. MOQ and lead time depend on the assessed formula, process, components, testing and project readiness; request those terms in writing.

Discuss this manufacturing brief

Explore the context

Build the right manufacturing brief.

Common questions

Before you request a quotation.

Atracurium Besylate 50 mg Liquid injectables

What is listed in the catalogue?

The catalogue lists Atracurium Besylate 50 mg as liquid injectables in its critical care & anaesthesia navigation area and non-beta-lactam manufacturing stream.

How do you confirm manufacturing availability?

Send Walter your requirement for Atracurium Besylate 50 mg Liquid injectables. The team reviews the applicable product permission and unit, formulation and equipment fit, testing, packaging and production schedule before confirming the manufacturing scope in writing. Request the relevant product and facility documents with your enquiry.

What do I need for a quotation?

Share the exact composition and strength, liquid injectables presentation, target market, initial quantity, preferred pack and timing. Identify whether this is a new product, development brief or transfer.

The quotation must confirm MOQ, inclusions, prerequisites and lead time for the proposed product and site.

What is needed for Indian and export markets?

For India, share the intended brand or institutional supply requirement, pack sizes, initial order quantity and artwork needs for Atracurium Besylate 50 mg Liquid injectables. Confirm the applicable product permission, manufacturing unit and labelling requirements with the team.

For export, identify each destination country, proposed pack, language and registration or dossier requirements. Ask which product-specific quality and stability documents are available. Container compatibility and destination-market requirements need review; a catalogue record does not establish export registration or a shelf-life commitment.

How do I submit my enquiry?

Use the product-specific enquiry button to carry this composition and dosage form into the form. After a successful submission, a receipt reference confirms that your brief has been saved for review. Use the RFQ checklist to prepare the remaining details.

Technical document review

Which documents can I ask Walter to review?

Ask about manufacturing and packing records, specifications, analytical methods, Certificates of Analysis (COA), stability evidence, the Process Validation Protocol (PVP) and Process Validation Report (PVR). The wider checklist below covers supplier qualification, technical transfer and ongoing supply.

View the full document checklist 14 review areas
Site, licence and audit scope
Manufacturing licence, applicable product permissions, GMP certificates, Site Master File, supplier-qualification questionnaire and relevant audit responses.
Manufacturing, packing and batch release
Master Formula Record (MFR), master packing instructions, Batch Manufacturing Record (BMR), Batch Packing Record (BPR), reconciliation and authorised release records.
Process validation and continued verification
Process Validation Protocol (PVP), Process Validation Report (PVR), process performance qualification documents and continued process verification trends.
Equipment, facilities and utilities
Validation Master Plan (VMP), user requirements, DQ/IQ/OQ/PQ records, calibration and maintenance evidence for relevant equipment and utilities.
Cleaning, carryover and hold times
Cleaning Validation Protocol (CVP), Cleaning Validation Report (CVR), residue limits, recovery studies and applicable clean, dirty and process hold-time studies.
Specifications and analytical evidence
Specifications, Method of Analysis (MOA), Standard Testing Procedure (STP), Certificates of Analysis (COA), analytical validation, verification and method-transfer records.
Stability, packaging and transport
Stability protocols/reports, ongoing stability commitments, pack specifications, approved artwork, compatibility and applicable packaging or transport studies.
Development and technology transfer
Development report, technology-transfer protocol/report, gap assessment, control strategy, critical quality attributes and critical process parameters.
Quality reviews, investigations and changes
Product Quality Review (PQR) / Annual Product Review (APR), deviations, CAPA, change control, OOS/OOT trends, complaints, recalls and relevant SOP/training records.
Material suppliers and impurity risks
API/excipient supplier qualification, traceability, material COAs, relevant origin declarations and impurity risk assessments with supporting tests.
Sterile-product evidence, where applicable
Contamination Control Strategy (CCS), media-fill/aseptic simulation reports, sterilisation and filtration validation, environmental monitoring, sterility/endotoxin and container-closure integrity evidence.
Computerised systems and data integrity
Computerised-system validation, access controls, audit-trail review, backup/restore checks and relevant data-integrity procedures.
Market-specific regulatory support
Applicable dossier sections, API master-file/CEP support, bioequivalence or biowaiver evidence and Certificate of a Pharmaceutical Product (CPP/CoPP), where required and available.
Quality agreement and access arrangements
Quality/technical agreement covering responsibilities, release, changes, subcontracting, investigations, complaints, recalls, audits and document access.

Agree the list for the exact product, site, process, pack, market and project stage. QA confirms what exists, applies and may be shared; some records may require an NDA, redaction or controlled review. See document definitions and review guidance.

Important qualification

This B2B catalogue record is not proof of current approval or confirmation that Atracurium Besylate 50 mg Liquid injectables is available for sale. It is not prescribing information or patient advice. Any Drugs Rules status, current approval, exemption, applicable unit, licence scope, formulation, claims, brand use, destination-market registration and commercial feasibility require documentary verification and Walter's written confirmation. Read the full regulatory disclaimer.

Composition and classification are taken from Walter's product catalogue. The manufacturing guide helps buyers prepare a technical brief. Clinical references, where shown, describe the cited product and study. Manufacturing guide updated .